Cut and bend machine for axial components. The standard version is designed for leads with lead diameters from .015 - .051" (0.4-1.3mm) Other versions available for reduced bend from body, fixed pitches (.2", .3", .4" or 5.08mm, 7.62mm, 10.16mm) and for heavy leads (up to .055" or 1.4mm)

The TP6 Machines are delivered with al the tools needed for adjustment. 

Same machine as TP6 with quick set up.

This system automatically adjusts the bending wheels, reducing the set-up time and make it easier  

The TP6/97 Machines are delivered with al the tools needed for adjustment. 

A Motor-98 can be connected to the manual TP6 machine.

TP6 machine with Motor-98 and CS10 loose parts feeder.

Do not want to buy a motor and loose parts feeder but still have to loose parts? We have tape guidessuitable for loose components that facilitate feeding low volumes of loose parts.

komponentguide för att enkelt kunna mata

lösa komponenter i TP6

Axial Cut and Bend machine for Axial Components with Delrin Inner Discs.

The TP6-D cuts & bends axial components as the regular TP6, with the difference that this machine has Delrin instead of metal inner discs so it will not mark the surface of the leads of the components when it bends them. This is important when working with very small and delicate components and for Military applications.

Cutting, bending and forming machine for axial components. The form obtained is a Stand-off which keeps the body of the component off the board. No dies are required.Large diameter components only: .039-.055" (1-1.4mm)

Cut, bend and form machine for axial components.

Three versions are available depending on the lead diameter of the components:

1. TP6/PR-F/1 - .019-.035 " (0.5-0.9mm)
2. TP6/PR-F/2 - .031-.039 " (0.8-1mm)
3. TP6/PR-F/3 - .039-.051 " (1-1.3mm)

Various dies are available for each version. The TNS is always supplied with this machine.

Cut and bend machine for axial components for vertical mount.

Two main versions are available. The first one for components with lead diameters .019-.031" (0.5-0.8mm). The second one for thicker leads .031-.051" (0.8-1.3mm). Tooling for different pitches is available.

Cutting, bending and forming machine for axial components for SMD. This is a special machine and it is necessary to obtain all dimensions when ordering.

The TP/LN-100 is a pneumatic machine used for cutting the leads of loose radial components. It is designed to adapt to a very wide range of radial parts. The upper stationary plate determines the cutting height; the standard is 3,2 mm. Additional plates to increase this height can be supplied upon request, and start at a height of 0,5 mm. The pneumatic foot pedal controls the stroke of the lower plate, which performs a quick cut of the leads, without any stress to the components. The plates have a standard grid pattern to accommodate most types of components. Plates with a special grid pattern or a particular diameter can be provided upon request. Lateral cuts at most common pitches allow for the easily handling of any deformed leads.

Pneumatic machines TP/LN-500/1 and TP/LN-500/2 cut the leads of any kind of radial components, regardless of the diameter, material, pitch and form. This is possible through the use of a cobalt “guillotine” blade. The upper plate which determines the cutting height (standard 3,2 mm) must be ordered separately from the machine
because in most cases it must be designed in special way to adapt to the requested height, form and pitch of the components. Additional plates to increase

height can be supplied upon request.

Cutting area 53×43 mm.
Standard Stationary Plate 340111 must be separately ordered (340111).
Codes for special plates will be provided in the order receipt.

Cutting area 53×93 mm.
Standard Stationary Plate 340211 must be separately ordered (340211).
Codes for special plates will be provided in the order receipt.

Manuel maskin för att klippa bandade radiella komponenter. Den finns tillgänglig för två olika hålbilder, 12.7mm (.5") eller 15mm (.59")

Motorized cutting machine for loose radial components. Adjustable speed. Easy and quick manual component feeding. Two belts hold the leads and feed them through the rotary blades.

The cutting length can be adjusted by turning an allen screw located on the right from guide

The TP/SC4 is a pneumatic machine for loose radial components. There are over 20 standard interchangeable dies available

Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request.

The TP/TS1 is a pneumatic machine for loose radial components. There are over 20 standard interchangeable dies available.

Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request.

Manual pneumatic machine to cut & form radial taped components. The upper movable die is controlled by the vertical stroke of the cylinder. The same die will form a variety of lead pitches without the need of any adjustments.

There are 10 standard interchangeable dies available. Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request

Manual cutting bending machine for taped axial components. The standard version is designed for components with lead diameters from .015-.051" (0.4-1.3mm). Other versions are available for reduced bend from body, fixed pitches .2, .3, .4" (5.08, 7.62, 10.16mm) and heavy leads up to .055" (1.4mm)

The TP6/EC machine is fully adjustable and it comes with all the tools necessary for the adjustments

Manual cutting machine for taped radial components. The TP6/R can be adjusted easily for different lead lengths.

The BR6 reel holder is available for the EC machine

The TP6/R-EC is available for two types of tape hole pitch:
1. TP6/R-EC/21 for tape pitch 12.7mm (.5")
2. TP6/R-EC/22 for tape pitch 15mm (.59

Manual cutting bending machine for taped axial components for vertical mount. It comes in two versions:

- For lead diameters 0.5-0.8mm or 0.8-1.3mm.

Motorized counter
for taped SMD component counting. This machine works in a simple way by counting the holes on the tape.
It can operate in two different ways:
Totalizer: components are counted from a zero reference, tape feed is motorized and the counter automatically stops at the tape end, to prevent loss of the total.
Preset mode: the desired component number is keyed on the keyboard and the counter automatically stops when it reaches the corresponding component. All functions are easy to operate by the help of interactive messages on the graphic display.

The COUNTY Component Counter is a microcomputer based instrument which counts axial and radial components on tape.

With the SMD adaptor it can also count SMD components. It counts in both directions. It is equipped with a divider from 1 to 19 and a totalizer mode counting or Preset mode with an alarm that starts when the desired component number has been reached.

The county is available in two versions, one with a rechargeable battery that can upload data to a PC (8301.074 for 110V & 8301.072 for 220V) and the other one without battery (8301.053 for 110V & 8301.051 for 220V). .

Maximum counting value: 899999 counts
Minimum lead diameter: 0.4mm
Axial component bandolier width: 55 - 110mm
Radial component bandolier width: max 18mm
Maximum component diameter : 14mm
Display: 4 digits 13mm height
Dimensions: 240x130x110mm Weight: 1.8Kg

The County adaptor for counting taped SMD components is an optional

accessory (8301.018), allows the counting of the SMD components through

the holes of the support tape. The worktop 8301.027 includes two easy insertions

pins with adjustable clutch. Furthermore, at least one handle (8301.030) is required

for rewinding the reels.
The aluminum empty reel (8301.021) is an available optional to speed up the

counting operations and subsequent rewinding of the SMD components 

The support for axial and radial components (8301.023) is a very useful accessory when the components come in a reel.

It is sold individually and a handle for it is available (8301.025)

The model SEF 1 is designed for separating wires of flat cables. Two different pitches of separation can be supplied: 1,27 mm (the wires are individually separated Code 73.OL01) or 2,54 mm (the wires are separated by couples Code 73.OL02).

This version is a "bench" manual machine suitable for separating edges of flat cables having maximum width of 33mm.

The model SEF 3 is designed for separating wires of flat cables. Two different pitches of separation can be supplied:

1,27 mm (the wires are individually separated Code 71.OL01) or 2,54 mm (the wires are separated by couples Code 71.OL02).

This machine is suitable for separating flat cables having maximum width of 66mm.
This model can be motorised with our MOT98 (code 7915030 220V or 7915031 110V).
With this verion it is possible to separate the cable from the edges and inside sections.