Artos PF-6

• Eliminates wire tangles, missfeeds and length variations
• Payout rate of up to 820 ft/min (4 m/sec)
• Improved loading features including: arm lock, improved side-plate design, and easier wire threading
• Strong control arm and excellent motor controls
• Allows for two different reels to be loaded at same time
• Spool diameter up to 609 mm.
• Spool weight up to 68 kg

Artos PF-10

• Extra Large Reel Capacity
• Simple Reel Loading and Unloading
• Minimal Threading of Wire
• Motorized Reel Lift
• Easy Opening Safety Guard
• Reel Rewind Feature
• Adaptive Feeding System for Up to 2 M/Sec.
• Spool weight up to 1135 kg
• Spool diameter up to 1220mm
• Spool width up to 960mm

Artos PF-11

• Maximizes productivity
• Tangle-free feeds
• Adaptive Feeding System up to 10 M/Sec (1968 Ft/min)
• Easy to load
• Easy to program Via touch screen. 

Eubanks Prefeeder

• A wide range of Prefeeders is available depending on needs.
• Automatic speed control.
• Interface for Eubanks wire stripper so both the prefeeder and autostrip shut down in the event of jam or tangle at the prefeed end.
• Max real size 400 X 250 mm.
• Max real weight 54 kg.
• Two reel holder available.

Ulmer ZG 200 B2

Motor driven Electro-pneumatic Pre feeder for single or multiple wires or tubs on reels.

• Max feed speed 2,1 m/s
• The feed speed is controlled by a dancing arm.
• Can be interfaced with cut and stripping machines
• Power 230 V 50 Hz – 16A
• Air 6 bar
• Dimension L500 x B420 x H465 mm
• Options: Sag control DHS 1000 and stand with base plate

Ulmer ZG 400 B2

Motor driven Electro-pneumatic Pre feeder for single or multiple wires or tubs on reels.

• Max feed speed 1,35 m/s
• The feed speed is controlled by a dancing arm.
• Can be interfaced with cut and stripping machines
• Power 230 V 50 Hz – 16A
• Air 6 bar
• Dimension L1100 x B480 x H550 mm
• Options: Sag control DHS 1000 and stand with base plate
   
  
  
  
  
  

Ulmer SAR 800

Motor driven Electro-pneumatic Pre feeder for single or multiple wires or tubs on reels.  

• Reel diameter 400 - 800 mm
• max drum weight 600 kg
• Option: pneumatic drumlift
• Max feed speed 2 m/s
• The feed speed is controlled by DHS1000 (sensors) or  KSP8000 (sliding wheels)
• Can be interfaced with cut and stripping machines   
• Power  3 Phase 400 Volt 50 Hz – 16A
• Air 6 bar

Ulmer SAR 1000

Motor driven Electro-pneumatic Pre feeder for single or multiple wires or tubs on reels.  

• Reel diameter 500 - 1000 mm
• max drum weight 600 kg
• Option: pneumatic drumlift
• Max feed speed 2 m/s
• The feed speed is controlled by DHS1000 (sensors) or  KSP8000 (sliding wheels)
• Can be interfaced with cut and stripping machines   
• Power  3 Phase 400 Volt 50 Hz – 16A
• Air 6 bar

Ulmer SAR 1250

Motor driven Electro-pneumatic Pre feeder for single or multiple wires or tubs on reels.  

• Reel diameter 600 - 1250 mm
• max drum weight 600 kg
• Option: pneumatic drumlift
• Max feed speed 2 m/s
• The feed speed is controlled by DHS1000 (sensors) or  KSP8000 (sliding wheels)
• Can be interfaced with cut and stripping machines   
• Power  3 Phase 400 Volt 50 Hz – 16A
• Air 6 bar

Sag control DHS1000 D

The sag control unit DHS1000 D is applicable as speed control and operates by contact-free detection of the materials’ sag and provides, according to the material position, setpoints to the connected machines. For adjustment control, 5 light barriers have been installed, which can be applied in position and direction to the relevant application